Installing LED Fog Lights and Auxiliary Lighting on a 1982-1992 Camaro daddycow.com

When adding auxiliary lighting, proper wiring is non-negotiable for safety and reliability. Fog lights should be wired through a relay, triggered by the low-beam circuit so they cannot be operated with high beams (a legal requirement in many jurisdictions). The power feed should come directly from the battery through a fused line sized appropriately for the light's current draw—typically 14-16 gauge wire for LED fog lights drawing 2-3 amps each.

The factory wiring behind the turn signal plugs provides convenient access points for triggering relays or connecting additional features. These are located just below the headlights, easily accessible when working on the front lighting . Always use waterproof connectors and route wiring away from heat sources, sharp edges, and moving suspension components. Heat-shrink butt connectors or soldered joints with adhesive-lined heat shrink provide professional-grade reliability that withstands decades of service.