How to Install LED Headlights on a Jeep Cherokee XJ for Nighttime Safety tumblr.com

Installing LED headlights on a Jeep Cherokee XJ is a straightforward job that takes about 30-60 minutes. Start by parking on level ground and disconnecting the negative battery terminal. Open the hood and locate the back of the headlight assembly. The XJ's headlight is held in place by a metal retaining ring with three screws. Remove these screws using a Phillips screwdriver. Carefully pull the factory sealed-beam headlight forward. Disconnect the wiring harness from the back of the bulb. Take your new LED headlight assembly and connect the H4 adapter harness if required. Some LED headlights have a built-in driver box (an external module that regulates power).