How to Aim Your Jeep LED Headlights and Auxiliary Lights Correctly tumblr.com

Modern Jeep LED headlights, especially projector-style housings, produce a distinct horizontal cutoff line with a slight upward step on the passenger side (for illuminating road signs and curbs). This sharp line is your adjustment target. Turn on your low beams. The goal is to align the brightest part of the beam, just below this cutoff line, with your reference marks. The top edge of the cutoff (the sharp line between light and dark) should be at or slightly below the horizontal tape line marking your headlight's center height. The upward step should be centered on the passenger-side vertical mark. Locate the adjustment screws on your headlight housing—usually one for vertical (up/down) and one for horizontal (left/right). Use a Phillips or hex driver to make small, quarter-turn adjustments while observing the beam pattern on the wall. Properly aimed, the driver's side will be slightly lower to prevent glare for oncoming traffic, while maximizing your forward view.