KTM LED Indicator Installation Tips for Beginners – Industry Mag industrymag.org

Remove the Old Indicators: Carefully unscrew the old turn signals from their mounts. Take note of how the wires are routed so you can replicate the path for your new ones .

Test Before Final Mounting: Before you secure everything into place, connect your new LED indicators and test them. Check if they are flashing at the correct speed. If not, this is the time to install your new flasher relay .

Secure the Connections: Once you are satisfied that everything works, make your final connections permanent. If you are crimping or soldering, ensure the joints are solid and covered with heat-shrink tubing or electrical tape to prevent water ingress and shorts .

Mount the Indicators: Fix the new indicators securely in place, ensuring they are tight but not over-tightened, as you could crack the housing. The final result will be a sleek, modern-looking KTM with bright, perfectly timed turn signals that are sure to turn heads.