Installing a Remote Start System in Your Dodge Ram 1500 autowebnews.org

To avoid these issues, always verify that your remote start system is connected to the proper lighting circuit. On most 2018 Ram 1500 models, the correct wire for headlight status is found at the body control module (BCM) or can be controlled through the CAN bus interface without direct wiring. After installation, perform this simple test from a safe distance: activate remote start at night while standing where you can clearly see the front of the truck. The headlights should turn on with a steady, non-flashing beam within one second of the engine starting. They should remain illuminated for the entire remote start run cycle (typically 10 to 20 minutes, depending on system programming). When the engine automatically shuts down (or when you manually shut it off by pressing the brake pedal without a key), the headlights should turn off within a few seconds. If the headlight behavior deviates from this pattern, double-check your wiring before using the system regularly.